What you need to set up the Xplova Noza S
To ride the Xplova Noza S you need the following parts. Add a 11-speed cassette on a Shimano/SRAM HG (HyperGlide) body (matching your bike’s drivetrain).
As an Amazon Associate we earn from qualifying purchases. Links below go to the matching part category — pick the exact size/speed for your bike. Affiliate disclosure
Your parts checklist
Cassette
Buy a 11-speed cassette for a Shimano/SRAM HG (HyperGlide) body, matching your bike’s rear-derailleur speed.
Find on AmazonFreehub body
Ships with a Shimano/SRAM HG (HyperGlide) body fitted.
Thru-axle adapter
Not required for this trainer’s setup.
Freehub body compatibility — Xplova Noza S
Every freehub standard, including the ones this trainer has no body for. The cassette mounts on the body, so the body decides which cassettes fit — not the trainer.
| Freehub standard | On this trainer | Cassette speeds |
|---|---|---|
| Shimano/SRAM HG (HyperGlide) | Included | 8/9/10/11/12-speed · smallest cog 11t |
| Shimano HG 11-speed road | No body for this trainer | 8/9/10/11/12-speed · smallest cog 11t |
| SRAM XD Driver Body | No body for this trainer | 11/12-speed · smallest cog 10t |
| SRAM XDR Driver Body | No body for this trainer | 11/12/13-speed · smallest cog 10t |
| Shimano Micro Spline | No body for this trainer | 12-speed · smallest cog 10t |
| Campagnolo | No body for this trainer | 9/10/11/12-speed · smallest cog 11t |
| Campagnolo N3W | No body for this trainer | 12/13-speed · smallest cog 9t |
| Zwift Cog (virtual shifting) | No body for this trainer | 8/9/10/11/12-speed · smallest cog 14t |
No body for this trainer means exactly that: no part exists to mount that cassette here. Use the compatibility checker to find trainers that take yours. Smart-trainer compatibility checker
Mounting your bike
What the Xplova Noza S actually asks of you, in order — resolved from its own spec, not a generic manual.
- Take the rear wheel off the bike. A direct-drive trainer replaces it entirely.
- Set the trainer to your axle standard using the supplied end caps.
- Fit a 11-speed cassette on the Shimano/SRAM HG (HyperGlide) freehub body, torque the lockring, then lower the bike on and engage the axle. The cassette must match your bike’s drivetrain, not the trainer.
- Spacer rule for the Shimano/SRAM HG (HyperGlide) body: an 11-speed cassette needs none, a 10-speed one needs the 1.85 mm spacer behind it. Getting this wrong is the usual cause of a cassette that will not seat or a lockring that bottoms out early.
- Spin the cranks by hand before you clip in: the chain should run quiet and straight. Noise here almost always means chainline or cassette spacing, not a faulty trainer.